Mechanical System Safety Relays
- Mekoallo ea Tšireletso e Ikhethileng
- Li-Isolators tsa Lipontšo
- Lisebelisoa tse sirelletsang tsa Surge
- Li-Relay tsa Tšireletso
- Isolated Intelligent I/O Modules
- Liheke tse Bohlale
- Li-transceivers tsa Optical Data tsa indasteri
- Li-Dew Point Analyzers tsa Inthaneteng
- Li-module tsa ho Fumana Boitsebiso
- HART data converter
PH6401-3A1B Sesebelisoa sa polokeho se bohlale
Lintlha tsa tekheniki
| Litšobotsi tsa phepelo ea matla | |
| Phepelo ea motlakase | 24V DC/AC |
| Tahlehelo ea hajoale | ≤90mA(24V DC) ≤140mA(24V AC) |
| Maqhubu a AC | 50Hz ~ 60Hz |
| Mamello ea motlakase | 0.85–1.1 |
| Litšobotsi tsa ho kenya | |
| Ho hanyetsa ka mohala | ≤ 15 Ω |
| Kenya hona joale | ≤50mA(24V DC) |
| Sesebelisoa sa ho kenya | Limmete tse 'ne tsa polokeho ea terata |
| Litšobotsi tsa sephetho | |
| Palo ea mabitso | 3NO+1NC |
| Boitsebiso ba puisano | AgSnO2+0.2 μmAu |
| Mofuta oa ho ikopanya | Tataiso e qobelloang |
| Kopana le tšireletso ea fuse | 10A gL/gG, NEOZED (hangata e butsoe lebitso) 6A gL/gG, NEOZED(lekgono le tlwaelehileng le kwetswe) |
| Matla a ho fetola (EN 60947-5-1) | AC-15,5A/230V;DC-13,5A/24V |
| Nako ea bophelo ea mechine | makhetlo a fetang 107 |
| Litšobotsi tsa nako | |
| Ho lieha ho qala | |
| Seta bocha | ≤300ms |
| Seta bocha ka letsoho | ≤150ms |
| tieho ea ho felloa ke matla | |
| Ts'ebetso ea ho emisa ka tšohanyetso | ≤30ms |
| Ho hloleha ha matla | ≤100ms |
| Nako ea ho hlaphoheloa | ≤300ms |
| Fana ka tšitiso e khutšoane | 20ms |
| setifikeiti sa polokeho | |
| Boemo ba Ts'ebetso (PL) | PLe e lumellana le EN ISO 13849 |
| Sehlopha sa Tšireletso (Katse.) | Cat.4 e lumellana le EN ISO 13849 |
| Nako ea Mosebetsi (TM) | Lilemo tse 20 li lumellana le EN ISO 13849 |
| Litaba tsa tlhahlobo (DC/DCavg) | 99% e lumellana le EN ISO 13849 |
| Boemo ba Botšepehi ba Polokeho (SIL) | SIL3 e lumellana le IEC 61508, IEC 62061 |
| Hardware Fault Tolerance(HFT) | 1 e lumellana le IEC 61508, IEC 62061 |
| Karolo e sireletsehileng ea ho hloleha (SFF) | 99% e lumellana le IEC 61508, IEC 62061 |
| Monyetla oa ho hloleha ha kotsi (PFHd) | 3.09E-10/h e lumellana le IEC 61508，IEC 62061 |
| StopCategory | 0 e lumellana le EN 60204-1 |
| 10% karolelano ea palo ea lipotoloho tse kotsi tsa ho hloleha ha likarolo (B10d) | |
| DC13,Ue=24V | ke hore 5A 2A 1A Lipotoloho 300,000 2,000,000 7,000,000 |
| AC15, Ue=230V | ke hore 5A 2A 1A Lipotoloho 200,000 230,000 380,000 |
| Litšobotsi tsa tikoloho | |
| Tšebelisano ea motlakase | lumellana le EN 60947 EN 61000-6-2 EN 61000-6-4 |
| Maqhubu a ho sisinyeha | 10Hz ~ 55Hz |
| Boima ba vibration | 0.35 limilimithara |
| Mocheso oa tikoloho | -20 ℃~+60 ℃ |
| Mocheso oa polokelo | -40 ℃~+85 ℃ |
| Mongobo o amanang | 10% ho isa ho 90% |
| Bophahamo | ≤ 2000m |
| Litšobotsi tsa insulation | |
| Tlhokomelo ea motlakase le sebaka sa creepage | E lumellana le EN 60947-1 |
| Boemo ba overvoltage | III |
| Boemo ba tšilafalo | 2 |
| Boemo ba ts'ireletso | IP20 |
| Matla a ho itšireletsa | 1500V AC, motsotso o le mong |
| Tekanyetso ea motlakase oa insulation | 250V AC |
| E lekantsoeng ka matla a impulse voltage | 6000V (1.2/50us) |
Litekanyo tsa kantle
Setšoantšo sa thibela
Setšoantšo sa lithapo
(1) Sesebelisoa sa wiring se amohela terminal e kopanyang ea plugable;
(2) Sebaka sa karolo ea koporo e bonolo ea terata ea lehlakoreng le kenang e tlameha ho ba kholo ho feta 0.5mm2, 'me karolo ea tlhahiso e tlameha ho ba kholo ho feta 1mm2;
(3) Bolelele bo pepeneneng ba terata bo ka ba 8mm, bo notletsoeng ka li-screws tsa M3;
(4) Mabitso a tsoang a tlameha ho fana ka likhokahano tse lekaneng tsa ts'ireletso ea fuse;
(5) Conductor ea koporo e tlameha ho mamella mocheso o potolohileng bonyane 75 ℃;
(6) Li-screws tsa terminal li ka baka misoperation, futhumatsang, joalo-joalo. Ka hona, ka kopo, tiisa ho latela torque e boletsoeng. Terminal screw tightening torque 0.5Nm.
Ho kenya
Li-relay tsa tšireletso li lokela ho kenngoa ka har'a lik'habote tsa taolo tse nang le bonyane boemo ba tšireletso ea IP54. Ho sa le joalo, ho kenya le ho sebelisoa ho lokela ho lumellana le litokisetso tse loketseng tsa GB 5226.1-2019 "Tsireletso ea Mechini le Motlakase - Thepa ea Mechini le Motlakase - Karolo ea 1: Maemo a Kakaretso a Theknoloji" .
Li-relay tsa polokeho ea PH6401-3A1B kaofela li kentsoe ka liporo tsa tataiso tsa DIN35mm. Mehato ea ho kenya ke e latelang
(1) Tlamella ntlha e ka holimo ea sesebelisoa holim'a seporo sa tataiso;
(2) Sututsa ntlha e ka tlaase ea sesebelisoa ka har'a terene ea tataiso.
Ho qhaqholla
Kenya screwdriver (bophara ba lehare ≤ 6mm) ka har'a latch ea tšepe karolong e ka tlaase ea sesebelisoa;
Sutumelletsa screwdriver holimo 'me u phunye latch ea tšepe tlase;
Hula phanele ea lisebelisoa holimo le ho tsoa seporong sa tataiso.
Tlhokomeliso
Ka kopo, netefatsa hore na sephutheloana sa sehlahisoa, mofuta oa leibole ea sehlahisoa, le litlhaloso li lumellana le konteraka ea theko;
Pele o kenya le ho sebelisa li-relay tsa polokeho, bala bukana ena ka hloko;
Haeba u na le lipotso, ka kopo ikopanye le Beijing Pinghe Technical Support Hotline ho 400 711 6763;
Relay ea polokeho e lokela ho kenngoa ka har'a khabinete ea taolo e nang le bonyane boemo ba ts'ireletso ea IP54;
Matla a 24V DC bakeng sa lisebelisoa, 'me tšebeliso ea matla a 220V AC e thibetsoe ka thata;
Tlhokomelo
(1) Ka kopo, lekola khafetsa hore na ts'ebetso ea polokeho ea relay ea polokeho e maemong a matle, le hore na ho na le matšoao a hore seketsoana kapa sa mantlha se sentsoe kapa se fetisitsoe;
(2) Ka kopo latela melao e amehang ea polokeho 'me u sebetse ho latela litaelo tse bukeng ena ea litaelo, ho seng joalo ho ka lebisa likotsing tse bolaeang kapa tahlehelo ea basebetsi le thepa;
(3) Lihlahisoa li ile tsa hlahlojoa ka thata-thata le taolo ea boleng pele li tloha fekthering. Haeba o fumana hore dihlahiswa ha di sebetse hantle mme o belaela hore mojule wa ka hare o na le phoso, ka kopo ikopanye le akgente e haufi kapa o iteanye ka ho toba le mohala wa theknoloji wa 400 711 6763.
(4) Nakong ea lilemo tse tšeletseng ho tloha letsatsing la ho pepa, mathata ohle a boleng ba sehlahisoa nakong ea tšebeliso e tloaelehileng a tla lokisoa ke Pinghe ntle ho tefo.