Okokufaka kwezinga lokushisa
- Izithiyo Zokuphepha Ezizimele
- I-Signal Isolators
- Amadivayisi Avikelayo ahlinzayo
- Ukudluliselwa Kwezokuphepha
- Amamojula E-I/O Ahlakaniphile Ahlukanisiwe
- Amasango Ahlakaniphile
- I-Industrial Data Optical Transceivers
- Ama-Dew Point Analyzers aku-inthanethi
- Amamojula Wokutholwa Kwedatha
- HART idatha converter
I-PHD-11TZ-46+
Uhlolojikelele
Okokufaka kwe-Thermal Resistor Resistor (RTD)Pt100 endaweni eyingozi kuya endaweni ephephile engu-1: 1.
Lo mkhiqizo udinga ukunikezwa kwamandla okuzimele, okunokunikezwa kwamandla okukodwa, okokufaka, namatheminali aphumayo.
Imininingwane
| Okokufaka endaweni eyingozi | |
| Isignali yokokufaka | Izintambo ezimbili noma ezintathu isignali ye-Pt100 |
| Ibanga lokulinganisa | -200 ℃-850 ℃ |
| Okukhiphayo ohlangothini lokuphepha: | |
| Isignali yokuphumayo | Isignali ye-RTD PT100 |
| Injabulo yamanje | 0.1-3mA |
| Izici zokuvikela i-Surge: | |
| I-Nominal discharge current ln(8/20μs) | 5 kA |
| Ileveli yokuvikela i-voltage Up(8/20μs): | 60V (umugqa ukuya kumugqa) |
| Ileveli yokuvikela i-voltage Up(8/20μs): | 600V (umugqa uye phansi) |
| Ngokwezindinganiso | I-GB/T18802.21-2016(ilingana ne-1EC61643-21:2012) |
| I-voltage yokuhlinzeka | 20-35VDC |
| Ukusetshenziswa kwamandla | ≤40mA (lapho ugesi ongu-24VDC) |
| Isikhombi se-LED | Okuluhlaza: Inkomba yamandla I-alamu yebanga eliphansi ikhanya ukukhanya okuphuzi, ukukhanya okubomvu kwebanga eliphezulu kuvuliwe |
| Ukunemba komphumela | 0.1%FS |
| Ukwehla kwezinga lokushisa | 0.1%FS/℃ |
| Izinga lokushisa | Izinga lokushisa lokusebenza: -20 ℃~+60 ℃, izinga lokushisa lokugcina: -40 ℃~+80 ℃ |
| Umswakama ohlobene | 10% ~ 95% RH akukho ukufingqa |
| Amandla e-Dielectric | Phakathi kohlangothi oluphephile ngaphakathi kanye nohlangothi olungaphephile ngaphakathi (≥ 3000VAC/min); phakathi kokunikezwa kwamandla kanye netheminali engaphephile ngaphakathi (≥ 1500VAC/min) |
| Ukumelana ne-insulation | ≥100MΩ (phakathi kokufaka/okuphumayo/ukunikezwa kwamandla) |
| Ukuhambisana kwe-electromagnetic | Ngokusho kwe-IEC 61326-1(GB/T 18268), IEC 61326-3-1 |
| MTBF | 100000h |
| Izidingo zocingo | Indawo yokusika evundlile ≥ 0.5mm2; Amandla okushisa ≥ 500V |
| Imishini yasensimini esebenzayo | Izintambo ezimbili noma ezintathu i-RTD PT100 |
| Indawo yokufaka | Ifakwe endaweni ephephile, ingaxhunywa kumathuluzi okuphepha angaphakathi ezindaweni eziyingozi kuze kufike ku-Zone 0, IIC, Zone 20, kanye ne-IIIC |
| Isitifiketi esiphephile ngaphakathi | |
| Uphawu lobufakazi bokuqhuma | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Izinga lokuvikela ukuqhuma | I-GB/T3836.1-2021 GB/T3836.4-2021 |
| Amatheminali 4-6,5-6 | Um:250V AC/DC Uo=8.4V DC lo=31mA Po=65.1mW Co=4.8µF Lo=20mH |
| Umzimba wesitifiketi | CQST(China National Quality Supervision and Test Center for Explosion Protected Electrical Products) Isikhungo sokuhlola imikhiqizo yokuvikela umbani sase-Shanghai |
Ubukhulu
Imidwebo Ehlelekile
Qaphela:
1. Umsebenzi wesitimela samandla uwumsebenzi ozikhethela wona, futhi abasebenzisi badinga ukucacisa indlela yokuphakelwa kwamandla lapho befaka i-oda.
Ukukhethwa kwezixhumi zikaloliwe wamandla kungabhekisela ekhasini 89 le-"Annex"
2. Lapho ufaka i-RTD yocingo emithathu, kuyadingeka ukuqinisekisa ukuthi izintambo ezintathu zinobude obulinganayo ngangokunokwenzeka.
3. Lapho ufaka i-RTD enezintambo ezimbili, amatheminali okuvimbela ukuphepha 4 no-2 kufanele afinyezwe
