- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
0102030405
PHL-T-RJ45 Network SPD(Ethernet network)
SPECIFICATIONS
◑ Technical Requirements of 10/100MHz: This suggests that the SPD is designed to operate effectively within the frequency range of 10/100MHz, which is common for Ethernet networks. This means it can protect network equipment operating within this frequency range, such as switches, routers, and other devices.
◑ Protection of LPZ0-LPZ2 and Subsequent Partition Boundaries: The SPD is capable of protecting against surges in zones LPZ0 (the zone with the highest risk of lightning strikes) through LPZ2 (areas where surges may still occur but with lower risk) and beyond. This indicates a comprehensive level of protection for various areas within a facility or system.
◑ Strong Lightning Protection Capability with High Discharge Current Protection Voltage: This suggests that the SPD has a robust ability to withstand lightning strikes and high discharge currents, as it can effectively clamp the voltage to a safe level during surge events. This feature is crucial for ensuring the resilience of network equipment against lightning-induced surges.
SPECIFICATIONS
Rated operating voltage Un |
5VDC |
Maximum operating voltage Uc |
6VDC |
Nominal working current IL |
100mA |
Nominal discharge current In (8 / 20μs) |
2.5KA |
The maximum discharge current (8 / 20μs) |
5kA |
Lightning impulse current limp(10/350μs) |
0.5kA |
Protection voltage Up (under In) line to line |
<15V |
Protection voltage Up (under In) line to ground |
<500V |
Interface type |
Input/output: female/female |
Bandwidth |
100MHz |
Insertion loss |
<-1.3dB |
Response time |
<1ns |
Working temperature range |
-40℃~+80℃ |
Installation method |
Optional DIN35mm rail mounting clamp |
Grounding method |
1.5mm² grounding wire |
Housing material |
Ferrous metal aluminum |
Test standard |
GB/T18802.21/IEC 61643-21 |