Get Instant Quote
Leave Your Message
PH-M series Mod bus data optical transceiver

Industrial Data Optical Transceivers

Products Categories
Featured Products

PH-M series Mod bus data optical transceiver

The PH-M series product is an industrial Modbus data optical transceiver, supports Modbus protocol, communication rate is 0-230. 4K, single optical port / dual optical
port chain network with IP30 protection grade, wavy aluminum reinforced enclosure mounted on 35mm DIN rail, DC (9-30) V power supply with relay alarm output,
redundant power supply and isolation protection function. PH-M221 supports one optical fiber interface, one data interface, PH-M222 supports two cascadable uplink and downlink optical fiber interfaces, and one data interface.

    Product features

    ◑ Support Mod bus industrial control protocol

    ◑ The longest optical fiber communication distance can reach 60KM

    ◑ The electric interface has the isolation functions with 1500V voltage and 600W surge protection

    ◑ It adopts standard industrial 35mm rail installation method

    ◑ Communication rate 0-230.4K

    ◑ Support single optical port/dual optical port chain network

    ◑ It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements. It can provide relay output optical fiber and power failure alarm

    Electrical interface

    Compatible with Modbus RS485 5PIN industrial terminal
    Isolation voltage: instantaneous isolation voltage 5000V; continous is olation voltage 1000V
    Support Modbus field bus protocol, communication rate 0~230. 4K.
    Termination resistor: This product does not have a termination resistor, but it can be connected with it externally when needed

    Optical fiber interface

    ◐ Fiber wavelength: multimode: 850nm, 1310nm; singlemode: 1310nm, 1550nm
    ◐ Optical fiber interface type: SC,ST and FC are optional;standard: SC interface
    ◐ Transmission optical fiber: multimode: 50/125, 62.5/125, 100/140um single mode: 8.3/125, 9/125um, 10/125um
    ◐ Transmission distance: multimode 2KM; single mode: 20KM

    Other indicators

    ◒ Power supply: power consumption support dual power redundant input,DC9-30V, typical DC24V, power consumption less than 1.5W
    Optical fiber link failure and power failure alarm relay output; contact maximum capacity: DC48V/1A, industrial terminal interface
    ◒ Dimensions: 136mm×105mm×52mm
    ◒ Working temperature: -10-70℃(-40~+85℃ optional)
    ◒ Relative humidity: ≤90% (no condensation);
    ◒ storage temperature: -40~80℃

    product display

    industrial data optical transceiver1mml