Industrial Data Optical Transceivers
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PH-S series S908 RIO bus optical transceiver
Product features
◑ Support S908 RIO industrial control fieldbus protocol.The communication rate is 1.544M adaptive
◑ The interface adopts standard BNC-F head coaxial interface, compatible with S908 data interface
◑ The longest optical fiber communication distance can reach 60KM
◑ The electric interface has the isolation functions with 1500V voltage and 600W surge protection
◑ It adopts standard industrial 35mm DIN rail installation method
◑ It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements. It can provide relay output optical fiber and power failure alarm
Electrical interface
◕ Support S908 RIO bus protocol
◕ Communication rate 1. 544 Mbps
◕ Standard F-head coaxial interface compatible with S908 data connector
◕ Isolation voltage: with 1500V isolation voltage and 600W surge protection function
◕ Termination resistor: This product is without termination resistor, but it can be connected with it when needed
Optical fiber interface
◐ Fiber wavelength: multimode: 850nm, 1310nm; singlemode: 1310nm, 1550nm
◐ Optical fiber interface type: SC, ST and FC are optional;standard: SC interface.
◐ Transmission optical fiber: multimode: 50/125, 62.5/125, 100/140um single mode: 8.3/125, 9/125um, 10/125um
◐ Transmission distance: multimode 2KM; single mode: 20KM
Other indicators
◒ Power supply: support dual power redundant input, DC9-30V, typical DC24V, power consumption less than 1.5W
◒ Contact Maximum capacity: DC48V/1A, industrial terminal interface
◒ Optical fiber link failure and power failure alarm relay output
◒ Dimensions: 136mm×105mm×52mm
◒ Working temperature: -10-70℃(-40~+85℃ optional)
◒ Relative humidity: ≤90% (no condensation);
◒ storage temperature: -40~80℃