Get Instant Quote
Leave Your Message
PH-TY series RS485 bus data optical transceiver

Industrial Data Optical Transceivers

Products Categories
Featured Products

PH-TY series RS485 bus data optical transceiver

The PH-TY series product is an industrial RS-485 data optical transceiver, supports A - B RS - 485 protocol, communication rate is 0 - 6M (0 - 10M optional), single optical port / dual optical port chain network with IP30 protection grade, wavy aluminum reinforced enclosure mounted on 35mm DIN rail, DC (9-30) V power supply with relay alarm output, redundant power supply and isolation protection function. PH-TY supports one optical fiber interface, one data interface, PH-TY supports two cascadable uplink and downlink optical fiber interfaces, and one data interface.

    Product features

    ◑ Support A - B RS - 485 industrial control protocol, communication rate supports 0-6M (0-10M is optional)
    ◑ The electric interface has the isolation functions with 1500V voltage and 600W surge protection
    ◑ Support single optical port/dual optical port chain network
    ◑ A-B DH-485 field bus 5PIN industrial terminal wiring(optional DP9 port)
    ◑ It can provide relay output optical fiber and power failure alarm.
    ◑ It adopts standard industrial 35mm rail installation method
    ◑ It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements

    Electrical interface

    ◕ A - B RS - 485 field bus
    ◕ Support rate 0-6M (0 - 10M optional)
    ◕ 5PIN industrial terminal connection (DP9 interface isoptional)
    ◕ Isolation voltage: instantaneous isolation voltage 5000V; continuous isolation voltage 1000V

    Optical fiber interface

    ◐ Fiber wavelength: multimode: 850nm, 1310nm; singlemode: 1310nm, 1550nm
    ◐ Optical fiber interface type: SC, ST and FC are optional;standard: SC interface.
    ◐ Transmission optical fiber: multimode: 50/125, 62.5/125, 100/140um single mode: 8.3/125, 9/125um, 10/125um
    ◐ Transmission distance: multimode 2KM; single mode: 20KM Longer distance optional

    Other indicators

    ◒ Power supply: support dual power redundant input, DC9-30V, typical DC24V, power consumption less than 1.5W
    ◒ Contact Maximum capacity: DC48V/1A, industrial terminal interface
    ◒ Optical fiber link failure and power failure alarm relay output
    ◒ Dimensions: 125mm×90mm(with card rail 100mm)×50mm
    ◒ Working temperature: -10-70℃(-40~+85℃ optional)
    ◒ Relative humidity: ≤90% (no condensation); 
    ◒ storage temperature: -40~80℃

    product display

    • industrt7l
    • industrial data optical transceiver1dk1