PH Series Remote I/O module
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
- Terminal Board
Digital output IO module
| Product model | PH-LW-8DO-N | PH-LW-8DO-P | PH-LW-16DO-N | PH-LW-16DO-P |
| Product description | 8-channel digital output module NPN type | 8-channel digital output module PNP type | 16-channel digital output module NPN type | 16-channel digital output module PNP type |
| Number of channels | 8 | 8 | 16 | 16 |
| "ON" signal voltage | 0V/DC | 24V/DC | 0V/DC | 24V/DC |
| "OFF"signal voltage | High resistance state | High resistance state | High resistance state | High resistance state |
| System bus input current rating | 50mA | 50mA | 75mA | 75mA |
| Maximum output current | 0.5A/channel，3A/module | 0.5A/channel，6A/module | ||
| Hardware response time | OFF to ON :Max.100us ， ON to OFF :Max.150us | |||
| Output impedance | <200mfi | |||
| Load type | Inductive loads, resistive loads, lamp loads | |||
| Short-circuit/overcurrent protection | Support | |||
| Reverse current protection | Support | |||
| Communication error diagnosis | Support | |||
| Isolation mode | Optically isolated from the field layer | |||
| Dimension | installation parameters | |||
| Dimension standard | 100mm×12mm×67mm（LWH） | |||
| Mounting type | DIN-35 rail | |||
| Product model | PH-LW-32DO-N | PH-LW-32DO-P |
| Product description | 32-channel digital output module NPN type | 32-channel digital output module PNP type |
| Number of channels | 32 | 32 |
| "ON" signal voltage | 0V/DC | 24V/DC |
| "OFF"signal voltage | High resistance state | High resistance state |
| System bus input current rating | 130mA | |
| Maximum output current | 0.5A/channel，6A/module | 0.5A/channel，6A/module |
| Hardware response time | OFF to ON :Max.100us ， ON to OFF :Max.150us | |
| Output impedance | <200mfi | |
| Load type | Inductive loads, resistive loads, lamp loads | |
| Short-circuit/overcurrent protection | Support | |
| Reverse current protection | Support | |
| Communication error diagnosis | Support | |
| Isolation mode | Optically isolated from the field layer | |
| Dimension | installation parameters | |
| Dimension standard | 100mm×24mm×67mm（LWH） | |
| Mounting type | DIN-35 rail | |
