Number of channels: 16 channels (dual channels)

Signal type: Dual line analog (temperature, voltage/current) input/analog output, three terminal isolation

Supporting isolation barrier: MTL5500 series dual channel analog safety barrier, P+F、 Pinghe simulation guide rail grid (12.8/16/18mm)

Loop current: LED current indication online test hole

Installation form: M4.8 self tapping or M4 screw fixation

Supporting card components:

S7-300PLC: 6ES7 331-1KF02 \ 7KF02 \ 7NF00 \ 7NF10332-5HF00 \ 650-8AK70, etc.

This product does not support the 7KF02 loop power supply mode (range card D).

Number of channels: 16 channels (dual channels)

Signal type: Dual line analog (temperature, voltage/current) input/analog output, three terminal isolation

Supporting isolation barrier: Pinghe simulation guide rail grid (12.8/16/18mm)

Loop current: LED current indication online test hole

Installation form: M4.8 self tapping or M4 screw fixation

Supporting card components:

S7-300PLC: 6ES7 331-1KF02 \ 7KF02 \ 7NF00 \ 7NF10332-5HF00 \ 650-8AK70, etc.

This product does not support the 7KF02 loop power supply mode (range card D).

Power supply and DB port power settings:

This product is designed for redundant power supply and comes with a power loss alarm output

DB1 port contains a 4-core power cord for supplying power to the PLC module. These power supplies are controlled by short-circuit caps set by the power output, with each short-circuit cap corresponding to a wire, as shown in the upper right figure. Before power transmission, settings should be made as needed.

Special note:

1. The brightness of the circuit LED can roughly indicate the magnitude of the circuit current;

2. Using a multimeter to short-circuit the current range of this circuit test hole can accurately measure the inner current without affecting the circuit operation;

When the circuit LED fails and opens, a spare LED can be inserted into the test hole for repair;

Parameter