Digital Input Isolation Conversion Board PHFD-32DI

Number of channels: 32

Signal type: Single line digital quantity (switch, proximity switch NAMUR) input, three terminal isolation

Supporting isolation barrier: MTL5500 series single channel digital input safety barrier, P+F、 Pinghe single channel digital input rail grid (12.8mm)

Loop current: LED current indication online test hole

Installation form: M4.8 self tapping or M4 screw fixation

Supporting card components:

S7-300PLC: 6ES7 321-1BL00 \ 650-8DK80, etc.

Power supply and DB port power settings:

This product is designed for redundant power supply and comes with a power loss alarm output

The DB port contains a 4-core power cord for supplying power to the PLC module.

These power supplies are controlled by short-circuit caps set by the power output, with each short-circuit cap corresponding to a wire, as shown in the upper right figure. Before power transmission, settings should be made as needed.
Parameter

Special note:

1. The brightness of the circuit LED can roughly indicate the magnitude of the circuit current;

2. Using a multimeter to short-circuit the current range of this circuit test hole can accurately measure the inner current without affecting the circuit operation;

When the circuit LED fails and opens, a spare LED can be inserted into the test hole for repair