Anolog Input
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
- Terminal Board
PHG-11ND-11 / PHG-22ND-1111
Overview
DC signal isolator, the circuit obtains power energy from the signal
input end, isolates and converts the 4~20mA current signal at the input
end into a 4~20mA current signal and sends it to the output end.
This product does not require an independent power supply, and the
input and output are isolated.
| Input | |
| Input signal | 4~20mA |
| Signal voltage | 12~30V DC |
| Output | |
| Output signal | 4~20mA |
| Load Resistance | RL≤(Ui-6)/0.02 |
| Basic parameters | |
| Output accuracy | 0.2%F.S |
| Response time | 10ms |
| Temperature drift | 0.01%F.S/°C |
| Temperature parameters | Working temperature: -20℃ ~ +60℃, Storage temperature: -40℃ ~ +80℃ |
| Relative humidity | 10%~95% RH no condensation |
| Insulation strength | ≥1500VAC/min (input/output) |
| Insulation resistance | 100MΩ (500V DC) (between input/output) |
| Electromagnetic compatibility | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Wire requirements | Cross section≥ 0.5mm2; Insulation strength ≥ 500V |
| Applicable field equipments | Current source |
PHD-11TC-33A-23
