DC Signal
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHG-11TE+/PHG-12TE+
Overview
The surge protection analog input signal isolator can convert two- or three-wire 4~20A or current source signals into current or voltage signal output through the isolator. The output parameters can be customized according to user needs.
This product needs to be powered independently, and the power supply, input and output terminals are isolated.
Specifications
| Input | |
| Input signal | Two or three-wire transmitter or current source signal |
| Distribution voltage | ≥18V |
| Input impedance | ≤100Ω |
| Output | |
| Output signal | DC signal (current/voltage) |
| Load resistance |
Current load resistance ≤500Ω Voltage load resistance <5mA |
| Surge protection features: | |
| Nominal discharge current ln(8/20μs) | 5kA |
| Voltage protection level Up(8/20μs): | 60V(line to line) |
| Voltage protection level Up(8/20μs): | 600V(line to ground) |
| According to standards | GB/T18802.21-2016(equivalent to 1EC61643-21:2012) |
| Basic parameters | |
| Supply voltage | 20~35VDC |
| Power consumption |
Current output <1.3W; voltage output <1W (PHG-11TE+ series) Current output <1.8W; voltage output <1W (PHG-12TE+ series) |
| LED indicator | Green: power indicator |
| Response time | 5ms to reach 90% of the final value |
| Temperature drift | 0.005% F.S/℃ |
| Temperature parameters |
Working temperature: -20℃ ~ +60℃, Storage temperature: -40℃ ~ +80℃ |
| Relative humidity | 10%~95% RH no condensation |
| Insulation strength | ≥2000VAC/min (between input/output/power supply) |
| Insulation resistance | 100MΩ (500 V DC) (between input/output/power supply) |
| Electromagnetic compatibility | GB/T 18268，IEC 61326-1 |
| MTBF | 80000h |
| Wire requirements | Horizontal cutting surface ≥ 0.5mm2; Insulation strength ≥ 500W |
| Applicable field equipments | Two, three-wire (HART) transmitter or current source |
Dimension
Connection wiring
Note:
1. PHG-11TE+ does not include output 2 part.
2. The power supply of the power rail is an optional function. Users need to specify the power supply mode when ordering. Please refer to attachment on page 89.
Specifications, models and codes
For example: one input and one output, two or three wire 4~20mA input, 4~20mA output, 24V power supply, model: PHG-11TE-21+