Not Intrinsically Safe Isolated I/O Modules
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
- Terminal Board
PHM-7100 Ethernet Gateway
Product overview
It is a fully isolated communication controller with a compact DIN rail installation, it supports not only the current mainstream MODBUS RTU and MODBUS TCP protocols, but also can be used in combination with a variety of expansion I/O modules to flexibly form a high-security and high-reliability remote monitoring, distributed remote control and SCADA system.
Technical indicators
| LAN port | MODBUS TCP TCP/IP MODBUS TCP it supports at the same time 5 clients terminal connection |
| Electromagnetic compatibility | IEC 6132 |
| Isolation ability | 1500VA |
| Working temperature | -20℃~+60℃ |
| Storage temperature | -40℃~+85℃ |
| Ambient humidity | ≤95%ARH Non-condensation |
| Protection level | IP20 |
RS485 serial communication master mode port MODBUS RTU protocol 1 start bit, 8 data bits, no parity bit, 1 stop bit Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. Number of extended I/O: 1-31 and manually set the number and type of to be connected devices.
Product characteristics
- Support standard MODBUS RTU and MODBUS TCP/IP protocol
- The LAN terminal supports up to 5 links.
- It can be used in combination with a variety of expansion I/O modules to flexibly form a high-security and high-reliability remote monitoring, distributed remote control and SCADA system.
- Support power supply and communication in two ways: backplane rail and terminal.