PHFS-16AIO-M motherboard with analog input and output

No. of channels: 16 channels

Signal types: dual wire analog(temperature, voltage/current) input/ analog output, three terminals isolated

Supporting barriers: PH series single channel analog barriers

Supporting signal isolators: PH series single channel analog isolator

Installation type: DIN rail installation or M5\M6 screw fixation

Online test interface( Use XT801 test instrument, support HART)

Supporting cards：

S7-300PLC: 6ES7 331-1KF02\7KF02\7NF00\7NF10，332-5HF00\650-8AK70.等。

This product support 7KF02 loop power model not(measurement range card)

Common configuration:

Universal input isolation barrier：PHD-11HD-21（Equipped with power distribution, supporting 2/4-wire instruments）

Temperature type: PHD-11HZ-*1/PHD-11HT-*1

Output (current type): PHC-11HD-11

Power supply and DB interface power settings:

This product is with redardunt power supply and has power loss alarm output

DB1 port contains 4-core power cord, and DB2 port contains 2-core power cord, which is used to supply power to PLC module. These power supplies are controlled by the short circuit cap set on the power output. Each short circuit cap corresponds to a wire, as shown in the figure above on the right. Before power transmission, it should be set as required.

Parameter

Ordering model	PHFS-16AIO-M
Description	Analog input and output motherboard
Technical specifications
No. of channels	16
No. of barries	16 single channle
Inside power voltage	24VDC redundant power
Power loss alarm output	Normal close
Onsite side power voltage	24VDC
Onsite channel maximal current	25mA
Inside connection type	D-SUB37PF
Onsite connection type	Screw
Terminal crimping specifications	0.3~2.5(mm2)
Signal type	2-wire transmitter,4-wire signal, temperature signal, current output
Isolator output signal	4-20mA
Working temperature	-30˚C~+55˚C
Storage temperature	-40˚C~+70˚C
Dimension(LxWxH)	292x174x60mm
Installation dimension	M5*4  279.4*101.6mm
ANNEX
Power fuse	Ø5*20  2A
Supporting cable
Ordering model	FL-37D-23A40-Y-Z-Xm
Remark: Y-PLC interface model  Z-card and signal type X-Length