PH Series Remote I/O module
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
- Terminal Board
4 Channel Relay output module
| Product model | PH-LW-4JDQ-NO |
| Product description | 4-channel relay output module |
| Number of channels | 4 |
| Contact type | N.O. contact |
| Maximum output current | 5A/channel，20A/module |
| System bus input current rating | 20mA |
| Maximum switch voltage | 250V/AC | 30V/DC |
| Hardware response time | OFF to ON :Max.10ms ， ON to OFF :Max.5ms |
| Output impedance | <200mfi |
| Load type | Resistance(5A/point，20A/module) |
| Switching frequency | 30Hz |
| Short-circuit protection | Support |
| Reverse current protection | Support |
| Communication error diagnosis | Support |
| Isolation mode | Optically isolated from the field layer |
| Dimension | installation parameters |
| Dimension standard | 100mm×12mm×67mm（LWH） |
| Mounting type | DIN-35 rail |
